Wheel spacer System 2 - 12119E-ABE-1
Push-through system with double-centering and ABE
Wheel spacer 12119E-ABE-1 is a push-through system with double centering, which ensures ideal driving behavior and prevents unwanted vibrations. For spacers narrower than 12mm, the fit between the vehicles's hub and the wheel have to be checked** - For help on this, please refer to our info sheet on the fit for System 2 - Download info sheet / Download dimension sheet. For difficult cases, there are usually different versions of the wheel spacers - We will be happy to advise you! Longer wheel bolts or knurled stud bolts are required, which are supplied in the ABE sets. Please note that these wheel mounting parts can only be mounted in conjunction with the stock rim!
With our System 2 ABE, you will receive a suitable general operating license (ABE) for standard wheel-tire combinations supplied, which means that in compliance with the conditions listed in the ABE, the registration of the wheel spacers is not required. Due to the large number of possible combinations, we still ask you to check in advance whether your combination is listed in the ABE! If the combination is not listed, a registration of the wheel spacers must still be made.
Technical data:
- Spacer thickness: 15mm per wheel (= 30mm per axle)
- Pitch circle diameter(s)*: 100/5 + 112/5
- Hub: 57,1mm
- Chamfer size PHO (standard spacer - rim side): 3x35°
- Hub hole depth NLT (standard spacer - vehicle side): 16mm
Packaging unit: 2 pieces (= 1 axle)
Watch mounting video on YouTube
Download mounting instructions as PDF file
*It may be a so-called double PCDs. The article can be used for vehicles with both PCDs.
**Consider the values PHO and ZBH from our dimension sheet in connection with the values PHO and NLT of the spacer.
NLT (spacer) >= ZBH (vehicle) und PHO (spacer) <= PHO (rim) (Download Infoblatt)
.png){kind=logo}
