Wheel spacer De Tomaso Pantera GTS 1971-1993

Car: De Tomaso

Label: Pantera GTS

Build: 1971-1993

Type: Pantera GTS

PCD:	VA: 114,3/5	HA: 114,3/5
Center Bore:	VA: 62,1	HA: 62,1
Thread:	VA: M12x1,5	HA: M12x1,5

Steel wheel

Art-nr.:	VA: M1215KEON	HA: M1215KEON
Mounting type:	VA: Mutter	HA: Mutter
Stud:	VA:	HA:
Head:	VA: Kegel 60°	HA: Kegel 60°
Length:	VA: 0 (=Mutter)	HA: 0 (=Mutter)
Hex:	VA: SW 19	HA: SW 19
tightening torque:	VA:	HA:

Alloy wheel

Art-nr.:	VA: M1215KEON	HA: M1215KEON
Mounting type:	VA: Mutter	HA: Mutter
Stud:	VA:	HA:
Head:	VA: Kegel 60°	HA: Kegel 60°
Length:	VA: 0 (=Mutter)	HA: 0 (=Mutter)
Hex:	VA: SW 19	HA: SW 19
tightening torque:	VA:	HA:

Material report Download	Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed.

De Tomaso
Pantera GTS
1971-1993
Pantera GTS

Special assessment

Car data
Wheel mounting
TÜV report

Stock:

Available

in transit

Special make

only on stock

Look at wheel spacers that are immediately available.

standard sizes

The most common wheel spacers for your vehicle. Nevertheless, please be sure to observe the corresponding article requirements!

Wheel Spacer System 2

System 2 - Push-through system with double-centering

The wheel spacers from our System 2 ensure ideal driving behaviour with their double centering.
Longer wheel bolts or knurled studs are required and must be ordered separately. Please ensure that your original bolts/nuts match the necessary specifications (conical or spherical seat, thread type, and shaft length).
For narrow wheel spacers up to 12mm, it is important to check compatibility between the spacer, your vehicle, and the wheel – guidance can be found in our System 2 Fitment Info Sheet - Download info sheet / Download dimension sheet.
From a thickness of 25 mm, please also check the availability of suitable longer bolts.
Our System 2 is available in both uncoated and anodized color versions. The color can be selected on the product detail page of each wheel spacer.

Spacer thickness: Indication in mm per wheel
Package unit: 2 pieces (= 1 axle)
Price: in EUR incl. stat. VAT

Watch mounting video on YouTube
Download mounting instructions as PDF file

Product info

only on stock:

standard sizes:

PCD wheel: 114,3/5	CB: 62,1	only on stock:	standard sizes:

PCD wheel: 114,3/5	CB: 62,1

Thickness

Product-nr.

Stock

Price per axle from

Thickness	Product-nr.			Price per axle from
10 mm	12857		to order	106,99 EUR
15 mm	12735		to order	119,00 EUR

Wheel Spacer System 3 RT (RaceTech)

System 3 RT (RaceTech) - Bolt-on system with double centering and wheel studs

Our RaceTech spacers differ from the normal versions in terms of technology! RaceTech spacers are made exclusively from the aluminium alloy EN AW 7075, which is used in aerospace, and are therefore even more resilient than our standard spacers. In short: RaceTech spacers are stronger and lighter than conventional wheel spacers!

Wheel spacers from System 3 RT (RaceTech) are fixedly screwed to the vehicle and ensure optimum handling with their double centering. The spacers are fastened to the vehicle using the fastening materials supplied. The rim can then be attached to the studs of the wheel spacers using the original wheel nuts. In most cases, the System 3 RT is 'plug-and-play' and is available in either a silver or black anodized finish. You can select the colour on the detail page of the respective wheel spacer.

Spacer thickness: Indication in mm per wheel
Packaging unit: 2 pieces (= 1 axle)
Mounting material included
Price: in EUR incl. stat. VAT

Watch mounting video on YouTube

Download mounting instructions as PDF file

depiction of Wheel Spacer System 3 RT (RaceTech)