.png){kind=logo}
Wheel spacer Chevrolet Corvette (09/68 bis 08/82)
Originator: Chevrolet Corvette| PCD: | VA: 120,65/5 | HA: 120,65/5 |
| Center Bore: | VA: 71,1 | HA: 71,1 |
| Thread: | VA: 7/16" UNF | HA: 7/16" UNF |
| 2%-limit | VA: 23 | HA: 23 |
Steel wheel
| Art-nr.: | VA: | HA: |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: | HA: |
| Length: | VA: | HA: |
| Hex: | VA: | HA: |
| tightening torque: | VA: | HA: |
Alloy wheel
| Art-nr.: | VA: | HA: |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: | HA: |
| Length: | VA: | HA: |
| Hex: | VA: | HA: |
| tightening torque: | VA: | HA: |
| Material report Download | Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed. |
System 5 - Push-through system without centering on the rim side
The wheel spacers from System 5 have a push-through system without centering on the rim side. The centering of the rim is still done with the vehicle's hub, which accordingly has to have a certain length. With our info sheet for width determination, you can check the maximum possible spacer thickness for your vehicle - download the info sheet. Longer wheel fastening parts are required, which must be ordered separately. Please pay attention to the design of your original screws/nuts (conical or spherical seat and thread/shaft length). Our System 5 is optionally available as an uncoated or colour anodized variant. You can select the colour on the detail page of the respective wheel spacer.
- Spacer thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Price: in EUR incl. stat. VAT
Watch mounting video on YouTube
Download mounting instructions as PDF file
System 3 RT (RaceTech) - Fixed screwed system with double centering and stud bolts
Our RaceTech spacers differ from the normal versions in terms of technology! RaceTech spacers are made exclusively from the aluminium alloy EN AW 7075, which is used in aerospace, and are therefore even more resilient than our standard spacers. In short: RaceTech spacers are stronger and lighter than conventional wheel spacers!
Wheel spacers from System 3 RT (RaceTech) are fixedly screwed to the vehicle and ensure optimum handling with their double centering. The spacers are fastened to the vehicle using the fastening materials supplied. The rim can then be attached to the studs of the wheel spacers using the original wheel nuts. In most cases, the System 3 RT is 'plug-and-play' and is available in either a silver or black anodized finish. You can select the colour on the detail page of the respective wheel spacer.
- Spacer thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Mounting material included
- Price: in EUR incl. stat. VAT
| PCD wheel: 120,65/5 | CB: 71,1 | Thread wheel: M12x1,5 |
|---|
| PCD wheel: 120,65/5 | CB: 71,1 | Thread wheel: M12x1,5 |
|---|
| Thickness | Product-nr. | Price per axle from | ||
|---|---|---|---|---|
| 25 mm | 14119S | to order | 205,00 EUR |