Wheel spacer System 2 - 12295
Push-through system with double-centering
Please note that for wheel spacers of System 2 with double centering for disc widths of less than 10mm per wheel, the flat system on the wheel hub must be checked before assembly. The height of the centering collar of your vehicle must be smaller than the scar hole depth of the wheel spacer. More info can be found here.
Wheel spacer 12295 is a push-through system with double centering, which ensures ideal driving behavior and prevents unwanted vibrations. For spacers narrower than 12mm, the fit between the vehicles's hub and the wheel have to be checked** - For help on this, please refer to our info sheet on the fit for System 2 - Download info sheet / Download dimension sheet. For difficult cases, there are usually different versions of the wheel spacers - We will be happy to advise you! From spacer thicknesses over 25mm, the availability of wheel bolts in the appropriate length must also be checked. Longer wheel bolts or knurled stud bolts are required, which must be ordered separately. Please pay attention to the design of the available fastening material (taper, ball or flat collar, thread and shaft length).
Technical data:
- Spacer thickness: 6mm per wheel (= 12mm per axle)
- Pitch circle diameter(s)*: + 120/5
- Hub: 72,6mm
- Chamfer size PHO (rim side):
- Hub hole depth NLT (vehicle side):
Packaging unit: 2 pieces (= 1 axle)
Watch mounting video on YouTube
Download mounting instructions as PDF file
*It may be a so-called double PCD. The article can be used for vehicles with both PCDs.
**Consider the values PHO and ZBH from our dimension sheet in connection with the values PHO and NLT of the spacer.
NLT (spacer) >= ZBH (vehicle) und PHO (spacer) <= PHO (rim) (Download info sheet)
.png){kind=logo}
