.png){kind=logo}
System X
Adapter system X
Our adapter system X is characterized by its wide variety and is used when your desired adaptation cannot be implemented using our other adapter systems due to technical reasons. It consists of two individual adapter discs. The first disc (A) of this system is bolted directly to the vehicle, meaning the bolt pattern and number of holes correspond to the standard specifications of your vehicle. The second disc (B) is then mounted onto disc (A) and serves as the mounting surface for the new wheel using bolts or nuts.
A distinction is made between System 3X (integrated studs in disc B) and System 4X (threaded holes in disc B). This system increases the number of technically feasible adaptations compared to single-disc adapters, allowing us to implement more complex adaptations—such as changes in bolt pattern and hole count—using our System X.
A distinction is made between System 3X (integrated studs in disc B) and System 4X (threaded holes in disc B). This system increases the number of technically feasible adaptations compared to single-disc adapters, allowing us to implement more complex adaptations—such as changes in bolt pattern and hole count—using our System X.
Example
Vehicle: 100/4 * 57,1 (VW Golf II)
Rim: 112/5 * 66,6 (Mercedes Benz)
Like our other adaptations, the System X is also covered by our strength certificate and thus enables an individual approval according to §21 - as always, the corresponding conditions, e.g. offset limit, clearance and wheel cover must be observed.
We recommend prior consultation with your inspection authority.
The maximum permissible load per wheel is 510kg. Please note that a reduction in the number of holes, e.g. vehicle 5-hole and rim 4-hole is not permitted! The minimum thicknesses for the adapter system X are 25mm per wheel for 3X (stud bolts) and 40mm per wheel for 4X (screw thread).
You can conveniently order your custom-made wheel online:
