.png){kind=logo}
Wheel spacer Land Rover Defender TD 2007-2016
Originator: Rudolf Stricker| PCD: | VA: 165,1/5 | HA: 165,1/5 |
| Center Bore: | VA: 122,6 | HA: 122,6 |
| Thread: | VA: M16x1,5 | HA: M16x1,5 |
| 2%-limit | VA: 5 | HA: 5 |
Steel wheel
| Art-nr.: | VA: M1615KEK | HA: M1615KEK |
| Mounting type: | VA: | HA: |
| Stud: | VA: | HA: |
| Head: | VA: Kegel 80° | HA: Kegel 80° |
| Length: | VA: 0 (=Mutter) | HA: 0 (=Mutter) |
| Hex: | VA: SW 27 | HA: SW 27 |
| tightening torque: | VA: | HA: |
Alloy wheel
| Art-nr.: | VA: M1615KEK | HA: M1615KEK |
| Mounting type: | VA: | HA: |
| Stud: | VA: | HA: |
| Head: | VA: Kegel 80° | HA: Kegel 80° |
| Length: | VA: 0 (=Mutter) | HA: 0 (=Mutter) |
| Hex: | VA: SW 27 | HA: SW 27 |
| tightening torque: | VA: | HA: |
| Material report Download | Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed. |
System 5 - Push-through system without centering on the rim side
The wheel spacers from System 5 have a push-through system without centering on the rim side.
The centering of the rim is still done with the vehicle's hub, which accordingly has to have a certain length. With our width determination info sheet, you can check whether the selected wheel spacer is suitable for your vehicle – download the info sheet.
Longer wheel bolts or knurled studs are required and must be ordered separately. Please ensure you select the correct type of fastening hardware (conical, spherical, or flat seat, thread type, and shaft length).
Our System 5 is available as an uncoated or colour anodized variant. You can select the colour on the detail page of the respective wheel spacer.
- Spacer thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Price: in EUR incl. stat. VAT
Watch mounting video on YouTube
Download mounting instructions as PDF file
