.png){kind=logo}
Wheel spacer GMC VAN
Originator: da-martin| PCD: | VA: 127/5 | HA: 127/5 |
| Center Bore: | VA: 78,1 | HA: 78,1 |
| Thread: | VA: 1/2" UNF | HA: 1/2" UNF |
Steel wheel
| Art-nr.: | VA: | HA: |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: Kopfform | HA: Kopfform |
| Length: | VA: | HA: |
| Hex: | VA: | HA: |
| tightening torque: | VA: | HA: |
Alloy wheel
| Art-nr.: | VA: | HA: |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: Kopfform | HA: Kopfform |
| Length: | VA: | HA: |
| Hex: | VA: | HA: |
| tightening torque: | VA: | HA: |
| Material report Download | Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed. |
Wheel Spacer System 3 RT Off-road (RaceTech) – Bolt-on system with studs and dual centering – for off-road use
Our RaceTech spacers differ significantly from standard versions in terms of technology! They are made exclusively from EN AW 7075 aluminium alloy, which is used in the aerospace industry. This makes them even stronger and more resilient than our regular spacers. In short: RaceTech spacers are tougher than conventional wheel spacers!
The System 3 RT Off-road (RaceTech) is a bolt-on system with studs, designed specifically without double centering for off-road vehicles with freewheel hubs. The spacers are mounted to the vehicle using the included fastening materials. The wheel is then mounted onto the spacer’s studs using the original wheel nuts.
No longer knurled studs are needed for System 3 – in most cases, the system is truly *plug-and-play***. The spacers are made from a special high-strength aluminium-magnesium alloy.
Technical Data:
- Spacer thickness: Specified in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Price: in EUR incl. VAT.
Watch the installation video on YouTube
| PCD wheel: 127/5 | CB: 78,1 | Thread wheel: 1/2 |
|---|
| PCD wheel: 127/5 | CB: 78,1 | Thread wheel: 1/2 |
|---|
| Thickness | Product-nr. | Price per axle from | ||
|---|---|---|---|---|
| 20 mm | 15560S | to order | 203,00 EUR |
| PCD wheel: 127/5 | CB: 78,1 | Thread wheel: M14x1,5 |
|---|
| PCD wheel: 127/5 | CB: 78,1 | Thread wheel: M14x1,5 |
|---|
| Thickness | Product-nr. | Price per axle from | ||
|---|---|---|---|---|
| 25 mm | 14349S | to order | 218,00 EUR |
System 3 RT (RaceTech) - Bolt-on system with double centering and wheel studs
Our RaceTech spacers differ from the normal versions in terms of technology! RaceTech spacers are made exclusively from the aluminium alloy EN AW 7075, which is used in aerospace, and are therefore even more resilient than our standard spacers. In short: RaceTech spacers are stronger and lighter than conventional wheel spacers!
Wheel spacers from System 3 RT (RaceTech) are fixedly screwed to the vehicle and ensure optimum handling with their double centering. The spacers are fastened to the vehicle using the fastening materials supplied. The rim can then be attached to the studs of the wheel spacers using the original wheel nuts. In most cases, the System 3 RT is 'plug-and-play' and is available in either a silver or black anodized finish. You can select the colour on the detail page of the respective wheel spacer.
- Spacer thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Mounting material included
- Price: in EUR incl. stat. VAT
Watch mounting video on YouTube
Download mounting instructions as PDF file
| PCD wheel: 127/5 | CB: 78,1 | Thread wheel: 1/2 |
|---|
| PCD wheel: 127/5 | CB: 78,1 | Thread wheel: 1/2 |
|---|
| Thickness | Product-nr. | Price per axle from | ||
|---|---|---|---|---|
| 20 mm | 14868S | to order | 197,00 EUR | |
| 25 mm | 14522S | to order | 212,00 EUR |