.png){kind=logo}
Wheel spacer Chevrolet 1/2 TON Truck 4WD (65 bis 87)
Car: Chevrolet
Label: 1/2 TON Truck 4WD (65 bis 87)
Build:
Type: alle
Registration: Special assessment
| PCD: | VA: 139,7/6 | HA: 139,7/6 |
| Center Bore: | VA: 110,5 | HA: 110,5 |
| Thread: | VA: 7/16" UNF | HA: 7/16" UNF |
Steel wheel
| Art-nr.: | VA: | HA: |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: | HA: |
| Length: | VA: | HA: |
| Hex: | VA: | HA: |
| tightening torque: | VA: | HA: |
Alloy wheel
| Art-nr.: | VA: | HA: |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: | HA: |
| Length: | VA: | HA: |
| Hex: | VA: | HA: |
| tightening torque: | VA: | HA: |
| Material report Download | Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed. |
System 5 - Push-through system without centering on the rim side
The wheel spacers from System 5 have a push-through system without centering on the rim side.
The centering of the rim is still done with the vehicle's hub, which accordingly has to have a certain length. With our width determination info sheet, you can check whether the selected wheel spacer is suitable for your vehicle – download the info sheet.
Longer wheel bolts or knurled studs are required and must be ordered separately. Please ensure you select the correct type of fastening hardware (conical, spherical, or flat seat, thread type, and shaft length).
Our System 5 is available as an uncoated or colour anodized variant. You can select the colour on the detail page of the respective wheel spacer.
- Spacer thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Price: in EUR incl. stat. VAT
Watch mounting video on YouTube
Download mounting instructions as PDF file
Wheel Spacer System 3 RT Off-road (RaceTech) – Bolt-on system with studs and dual centering – for off-road use
Our RaceTech spacers differ significantly from standard versions in terms of technology! They are made exclusively from EN AW 7075 aluminium alloy, which is used in the aerospace industry. This makes them even stronger and more resilient than our regular spacers. In short: RaceTech spacers are tougher than conventional wheel spacers!
The System 3 RT Off-road (RaceTech) is a bolt-on system with studs, designed specifically without double centering for off-road vehicles with freewheel hubs. The spacers are mounted to the vehicle using the included fastening materials. The wheel is then mounted onto the spacer’s studs using the original wheel nuts.
No longer knurled studs are needed for System 3 – in most cases, the system is truly *plug-and-play***. The spacers are made from a special high-strength aluminium-magnesium alloy.
Technical Data:
- Spacer thickness: Specified in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Price: in EUR incl. VAT.
Watch the installation video on YouTube
| PCD wheel: + 139,7/6 | CB: | Thread wheel: |
|---|
| PCD wheel: + 139,7/6 | CB: | Thread wheel: |
|---|
| Thickness | Product-nr. | Price per axle from | ||
|---|---|---|---|---|
| 20 mm | 14332S | to order | 219,00 EUR | |
| 25 mm | 14435S | to order | 237,00 EUR |