.png){kind=logo}
Wheel spacer Audi A8 (D4) 2010-2017
Originator: IFCARCar: Audi
Label: A8 (D4)
Build: 2010-2017
Type: 4H
| PCD: | VA: 112/5 | HA: 112/5 |
| Center Bore: | VA: 66,5 | HA: 66,5 |
| Thread: | VA: M14x1,5 | HA: M14x1,5 |
| 2%-limit | VA: 11 | HA: 11 |
Steel wheel
| Art-nr.: | VA: V1415KU303 | HA: V1415KU303 |
| Mounting type: | VA: Schraube | HA: Schraube |
| Stud: | VA: | HA: |
| Head: | VA: KU R13 2-tlg. | HA: KU R13 2-tlg. |
| Length: | VA: 30 mm | HA: 30 mm |
| Hex: | VA: SW 17 | HA: SW 17 |
| tightening torque: | VA: 140 | HA: |
Alloy wheel
| Art-nr.: | VA: V1415KU303 | HA: V1415KU303 |
| Mounting type: | VA: Schraube | HA: Schraube |
| Stud: | VA: | HA: |
| Head: | VA: KU R13 2-tlg. | HA: KU R13 2-tlg. |
| Length: | VA: 30 mm | HA: 30 mm |
| Hex: | VA: SW 17 | HA: SW 17 |
| tightening torque: | VA: 120 - 140 | HA: 120 - 140 |
| §19 TÜV part approval report Download | Wheel spacers have basically to be checked by your TÜV/MOT! Please check whether your rim-/tyre-combinations are quoted in the TÜV part approval report. |
| Material report Download | Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed. |
A8 (D4)
2010-2017
Type: 4H
System 2 Plug&Play with ABE - Push-through system with double-centering and ABE
The System 2 with ABE is a Plug&Play push-through system with double centering, which ensures ideal driving behaviour and prevents unwanted vibrations.
For spacers narrower than 12mm, the fit between the vehicles's hub and the wheel have to be checked** — see our fitment info sheet for System 2 - Download info sheet / Download dimension sheet.
For difficult cases, there are usually different versions of the wheel spacers - We will be happy to advise you!
Longer wheel bolts or knurled studs are required and are included in the ABE sets. Please note: these fasteners may only be used with OEM wheels! Before purchasing, please double-check the length of your original bolts, as these can differ even with OEM wheels. If needed, you may require a different bolt length than what is supplied in the ABE set.
With System 2 ABE, you receive an ABE (german general operating permit) for factory wheel-tire combinations, allowing you to avoid registration, provided you meet all conditions stated in the ABE. Due to the wide variety of possible combinations, please ensure that your setup is listed in the ABE! If not, a separate approval may still be required.
- Spacer thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Mounting material included
- Price: in EUR incl. stat. VAT
Watch mounting video on YouTube
Download mounting instructions as PDF file
| Thickness | Product-nr. | Price per axle from | ||
|---|---|---|---|---|
| 10 mm | 12433W-ABE-4 | in stock | 111,00 EUR | |
| 12 mm | 12434W-ABE-3 | in stock | 115,00 EUR | |
| 15 mm | 12435W-ABE-3 | in stock | 123,00 EUR | |
| 20 mm | 12436W-ABE-3 | in stock | 140,00 EUR |