Adaption Chevrolet Trax 2013-

Car: Chevrolet
Label: Trax
Build: 2013-
Type: KL1B
PCD: | VA: 105/5 | HA: 105/5 |
Center Bore: | VA: 56,6 | HA: 56,6 |
Thread: | VA: M12x1,5 | HA: M12x1,5 |
2%-limit | VA: 23 | HA: 23 |
Steel wheel
Art-nr.: | VA: M1215KEG90EBL | HA: M1215KEG90EBL |
Mounting type: | VA: Mutter | HA: Mutter |
Stud: | VA: M1215RE40F | HA: M1215RE40F |
Head: | VA: Kegel 60° | HA: Kegel 60° |
Length: | VA: 0 (=Mutter) | HA: 0 (=Mutter) |
Hex: | VA: SW 19 | HA: SW 19 |
tightening torque: | VA: | HA: |
Alloy wheel
Art-nr.: | VA: M1215KEG90EBL | HA: M1215KEG90EBL |
Mounting type: | VA: Mutter | HA: Mutter |
Stud: | VA: M1215RE40F | HA: M1215RE40F |
Head: | VA: Kegel 60° | HA: Kegel 60° |
Length: | VA: 0 (=Mutter) | HA: 0 (=Mutter) |
Hex: | VA: SW 19 | HA: SW 19 |
tightening torque: | VA: | HA: |
Material report Download | Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed. |

Trax
2013-
Type: KL1B

Hub adaption System 2 - Push-through system with double centering
Our system for the adaption of the center bore. Longer wheel fastening parts are required, which must be ordered separately. Please pay attention to the design of your original screws/nuts (conical or spherical seat and thread/shaft length).
- Thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Price: in EUR incl. stat. VAT
Watch mounting video on YouTube
Download mounting instructions as PDF file


PCD wheel: 105/5 | CB: 70,1 | Thread wheel: | ![]() |
---|
PCD wheel: 105/5 | CB: 70,1 | Thread wheel: |
---|
Thickness | Product-nr. | Stock | Price per axle from | |
---|---|---|---|---|
10 mm | 32895 | in stock | 111,99 EUR |