.png){kind=logo}
Adaption Chevrolet Caprice 1977-1989
Originator: MorvenCar: Chevrolet
Label: Caprice
Build: 1977-1989
Type: 3. Gen
| PCD: | VA: 120,65/5 | HA: 120,65/5 |
| Center Bore: | VA: 70,2 | HA: 70,2 |
| Thread: | VA: 7/16" UNF | HA: 7/16" UNF |
Steel wheel
| Art-nr.: | VA: M7/16KEON | HA: M7/16KEON |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: Kegel 60° | HA: Kegel 60° |
| Length: | VA: 0 (=Mutter) | HA: 0 (=Mutter) |
| Hex: | VA: SW 19 | HA: SW 19 |
| tightening torque: | VA: | HA: |
Alloy wheel
| Art-nr.: | VA: M7/16KEON | HA: M7/16KEON |
| Mounting type: | VA: Mutter | HA: Mutter |
| Stud: | VA: | HA: |
| Head: | VA: Kegel 60° | HA: Kegel 60° |
| Length: | VA: 0 (=Mutter) | HA: 0 (=Mutter) |
| Hex: | VA: SW 19 | HA: SW 19 |
| tightening torque: | VA: | HA: |
| Material report Download | Unfortunately, for this product there is no specific TÜV-part approval. You can find our TÜV-material and strength report by clicking the button. This report can be used for §21 acceptance tests where a TÜV-check is needed. |
Chevrolet
Caprice
1977-1989
Type: 3. Gen
Caprice
1977-1989
Type: 3. Gen
Stock:
Available
in transit
Special make
Adaption System 2
Adaption System 2
Hub adaption System 2 - Push-through system with double centering
Our system for the adaption of the center bore. Longer wheel fastening parts are required, which must be ordered separately. Please pay attention to the design of your original screws/nuts (conical or spherical seat and thread/shaft length).
- Thickness: Indication in mm per wheel
- Packaging unit: 2 pieces (= 1 axle)
- Price: in EUR incl. stat. VAT
Watch mounting video on YouTube
Download mounting instructions as PDF file
Product info